Wonky Lines - The Printed Fabric Bee

-
 Gerrie Congdon was this month's Queen at The Printed Fabric Bee.  
She requested fabric with wonky, organic lines and she said that she liked orange, red and chartreuse.  Now that is a color way I can get in to!  

I started off by creating a half yard piece of ice dyed fabric using Gerrie's three colors.  
The Chartreuse is hiding on the right hand side.
Next I designed a stencil using my Silhouette electronic cutter and a sheet of transpanency film from a photograph of tree bark.  Believe it or not, creating the stencil was the most time consuming part of this project!
The stencil is hard to see in this photo but it is sitting on top of the fabric.
Little tiny lines and irregular shapes cut perfectly.
I taped the stencil to the bottom of a blank screen. . .
 . . . and pulled prints over the entire piece with red textile paint (Jacquard).

 Here's a close up of the resulting pattern.
 Gerrie wanted an 8"x18" piece.
Here is a close up of the 6" giveaway piece.

Visit Gerrie's blog or our Facebook page to enter for a chance to win all 9 six inch Wonky line blocks!  Then hop over to all The Printed Fabric Bee member's blogs to see how they have created their Wonky Line fabrics this past month.

Julie Bassechess Booth: http://www.threadbornblog.com/





Susan Purney Mark: http://susanpm.com/



If you created any wonky lines of your own, please post them on our Facebook page.  If you posted your wonky lines on your blog I would be happy to pin them to our Pinterest Board too, just send me the link!

Comments

Carol R. Eaton Designs said…
I'd love to hear more about how to create a stencil!
February 20, 2014 at 7:44 AM
Post a Comment

Popular posts from this blog

Gelli Plate Tutorial with Leaves

-
Image
Here's the Gelli Plate Tutorial you asked for! My Gelli plate has been well used and well loved. 1. Place Gelli Plate on a flat, covered working surface, and place small dots of paint onto the plate.  My demo photos are with me using acrylics and paper but it works exactly the same with fabric paint and fabric.  I like using Jacquard Textile paint when I make fabric prints. 2. Use a brayer to spread the paint evenly across the plate. 3.  I used the leaves as a resist for the first print. 4. Place the paper/fabric on top of the printing plate and smooth it out nicely to get an even print. 5.  Carefully lift up the paper/fabric. Found a photo from when I printed the fabric - see same process. This is a first print. 5.  I know that MONOprinting means ONE print but seriously, when you remove the leaves from the plate there are these beautifully textured leaves left on the plate just dying to be printed.  I couldn't ignore them!  So this is wher
Read more

Quilt National

-
Image
My husband and I took a red-eye flight to Columbus, Ohio, and then drove the one hour to Athens, Ohio, to attend the opening of the Quilt National quilt show where my piece, Wild Flowers was being shown. Made a stop at Tim Horton's, a Canadian chain for some delicious breakfast sandwiches and donut holes. We went to the Kennedy Art Museum, on the Ohio University campus. This is the side of the building. Photo of the front of the building from the cleveland.com website. The building was designed in the 1860s by Cleveland architect Levi Scofield, and was originally part of the Athen's Lunatic Asylum. It opened in 1996 as the Kennedy Museum of Art. There were some lovely prints, paintings and exhibits. It didn't take long to tour, which was good for my knees. I was glad to be able to see this Elizabeth Catlett print. I admire her work. I've seen some of her her other prints in person, and was anxious to also see this one. Friday evening, the Quilt National show opened, and
Read more

Autumn is for the Birds

-
Image
I was thrilled when my friend Jamie Fingal ask me to create something using her new fabric line, Autumn is for the Birds, from Hoffman Fabrics. I decided to use my favorite method of creating: free form piecing.  When I create a quilt with this method I rarely plan anything out, other than perhaps a general size and a few elements.  The problem with this method is that I often have to rearrange as I go.  And sometimes I need to unpick - a LOT.  I took a few photos as I went to help me get an idea of where things were going and then based upon those photos I added or changed.  I put the photos together in a short power point so that you could see a little bit of my process.  I apologize for the dark photos as my design wall is in a dark hallway but I think it still gives you a good idea of how things went. The final quilt is approximately 30"x 37". I love the focus fabrics!  There are a lot of textures in all of the fabrics.  Honestly, I could have quilted
Read more