Swirly Whirly Twirly

-
Last week I posted my internal debate about where to go next with my free-form pieced block made from ice-dyed fabrics.
I decided I really liked the idea of adding some black frames to the piece but wasn't quite sure how I would do it.
I remembered seeing a demonstration on how to piece a circle into a square of fabric and wondered if I might be able to use the same principal to create the design I wanted.
First I used a square ruler to cut a square from the center:
Next I stitched a strip of black fabric around the square cut out, flipped the square around and then stitched the square back into the hole.  I have never stitched a Y seam and of course I wasn't smart enough to look up instructions on youtube BEFORE I stitched.  I just worked intuitively and miraculously it fit and lays flat too!  
I then repeated the process for the next square and added a thicker black border around the outer edge:
I love how it turned out!
I'm thinking I need to make a few more of this pattern with my other ice dyed fabrics.
. . .But I must restrain myself and quilt this piece FIRST.
Making another one like it will be my reward for finishing this one.
The top is 37" square.
Any brilliant ideas on how to quilt it?
Lines? squiggles? circles? feathers?
Do I quilt the borders or leave them to pop out?
So many questions to answer before I quilt.
If you have answers to any of these questions please let me know in the comments section!

Comments

Sylvia said…
I think that you will want to stitch, close to the edge, of the black strips. Use black thread to mask it. It will help you stabilize the piece. While I was quilting the collob piece, I cquilted the black strips, maybe 1/16th inch in and it helped a lot!
August 30, 2012 at 2:38 PM
Quilter Beth said…
I love how your piece turned out. I think you were VERY brave to cut into it like that. Sometimes it is at that point (the cutting into it) where I freeze up, and the piece ends up in a box for a really long time. I need to be more brave.
August 30, 2012 at 11:23 PM
Glen QuiltSwissy said…
I, too, love this. And like Beth, I tend to freeze up at that point too!

I vowed to step out this year, and this project might be the way I do it.

glen
August 31, 2012 at 12:11 AM
Nina Marie said…
Its amazing what a little neutral color will do to anchor a piece! Elizabeth Barton once told me that I really do need to use more neutrals in every piece I do so now I make it a rule. That said - I would FMQ nice wavy echoing lines radiating from the center - stitch in the ditch the black thin line - and not heavily quilting the outer border. There has been a move in the last few years to quilt heavily pieces but I find that way too flat for my tastes. I mean why work in fabric if you're going to flatten the heck out of it?!

Still I struggle with quilting lines too so I'm never sure if my ideas are right!
August 31, 2012 at 3:18 AM
Unknown said…
I also like the way this piece looks, defined by the black fabric. What about a spiraling circle coming out from the center to accent the whirling design?
August 31, 2012 at 3:44 PM
wholly jeanne said…
It was a striking piece before, but you added that black, and POW. It's stunning. I have no idea what to suggest about quilting, though. Look forward to seeing what you decide to do.
August 31, 2012 at 8:29 PM
Anonymous said…
I loved how you started the piece last week, and adding the neutral color makes it pop even more. Thanks for sharing!
September 1, 2012 at 8:43 PM
Marilyn said…
Someone on QA prints photos of their quilt and draws the various quilting options on them to help choose. Maybe that woul dhelp you on this one. It is lovely. I am amazed at the difference the black squares make. I would not have thought of that.
September 2, 2012 at 5:55 AM
Lisa from DippyDyes said…
Wow - I don't have much to add to what others have written. The black adds so much, and bravo for taking the leap to cut into your top. As far as heavy quilting goes, some of that is driven by judging. I made the quilt at http://dippydye.blogspot.com/2009/12/quilt-for-lancaster-almost-done.html to show off my hand-dyed Radiance, and wanted only the black quilted, so the colored patches would pop. The judging form said they would like to see the colored patches quilted too.
September 2, 2012 at 6:22 AM
Post a Comment

Popular posts from this blog

Gelli Plate Tutorial with Leaves

-
Image
Here's the Gelli Plate Tutorial you asked for! My Gelli plate has been well used and well loved. 1. Place Gelli Plate on a flat, covered working surface, and place small dots of paint onto the plate.  My demo photos are with me using acrylics and paper but it works exactly the same with fabric paint and fabric.  I like using Jacquard Textile paint when I make fabric prints. 2. Use a brayer to spread the paint evenly across the plate. 3.  I used the leaves as a resist for the first print. 4. Place the paper/fabric on top of the printing plate and smooth it out nicely to get an even print. 5.  Carefully lift up the paper/fabric. Found a photo from when I printed the fabric - see same process. This is a first print. 5.  I know that MONOprinting means ONE print but seriously, when you remove the leaves from the plate there are these beautifully textured leaves left on the plate just dying to be printed.  I couldn't ignore t...
Read more

Fabric Printing at Home Blog Tour

-
Image
About two months ago I wrote a review about the book Fabric Printing at Home written by my friend, Julie B. Booth . Today I'm going to show you one of the things I learned from her book and then give you an opportunity to win a copy of the book for yourself. I used a hot glue gun to create a design onto a toilet paper roll.  I was impatient and didn't seal the toilet paper roll with white glue or a gel medium before creating my design.   I inserted a short roller handle that one can find at the local hardware store into the toilet paper roll. . .   . . . and used my 3x5" Gelli Plate as a paint palette.  I rolled the paint across a sample piece of fabric. . . . . .first going long ways. . .  . . .and then again short ways. I really like the texture this provides whether I go once or twice across the fabric and I'm gladly adding it to my art "toolbox."  Have you tried something like this before?  What ha...
Read more

Quilt National

-
Image
My husband and I took a red-eye flight to Columbus, Ohio, and then drove the one hour to Athens, Ohio, to attend the opening of the Quilt National quilt show where my piece, Wild Flowers was being shown. Made a stop at Tim Horton's, a Canadian chain for some delicious breakfast sandwiches and donut holes. We went to the Kennedy Art Museum, on the Ohio University campus. This is the side of the building. Photo of the front of the building from the cleveland.com website. The building was designed in the 1860s by Cleveland architect Levi Scofield, and was originally part of the Athen's Lunatic Asylum. It opened in 1996 as the Kennedy Museum of Art. There were some lovely prints, paintings and exhibits. It didn't take long to tour, which was good for my knees. I was glad to be able to see this Elizabeth Catlett print. I admire her work. I've seen some of her her other prints in person, and was anxious to also see this one. Friday evening, the Quilt National show opened, and...
Read more