Printing and Writing

-
I decided to make a few pieces for the Amazing Alphabet Readers Challenge in Cloth Paper Scissors magazine.  The rules are to create an original 4"x 6" mixed media piece of lettering.

I broke out my 6"x6" Gelli Plate.  I have used my larger plate a LOT, but haven't had a reason to use my smaller one yet and this seemed like the perfect project for it.  I added some acrylic paints to the plate, some homemade and store bought stencils and printed onto Strathmore Mixed Media 100 lb paper.  
I really should have cut more paper!  
The pieces print up so quickly and I really enjoy adding extra layers.  
I find mono-printing so relaxing.
I don't have any photos of the process because I was having too much fun and forgot to pull out the camera.
Some of the lettering was written directly onto the mono-printed pages and some were written on to white tissue paper and then applied to the mono-printed paper with Golden Matte Medium.  I was having a good time coming up with short L words because I like the letter "L".  Many years of writing a letter over and over can do that to you.
I then played with some other words which I thought might be appropriate for some friends who are going through hard times.


And finally I threw in one word for the fun of it. . .
. . . and it turned out to be my favorite piece.
Working with these pieces on paper has given me some fun ideas for a project I would like to do with fabric.  A fun mini-quilt made with monoprinted fabric and words cut from fabric using my electronic cutter.  I'll keep you posted!

Comments

landscapelady said…
very cool! Ive never worked with paper and it's interesting to see. I don't know what a gelli plate is, guess I should look it up:-)
thanks for sharing
April 8, 2013 at 4:57 AM
Leslie Tucker Jenison said…
Really fun to see these, Lisa! Thanks for sharing!
April 9, 2013 at 10:59 PM
Post a Comment

Popular posts from this blog

Gelli Plate Tutorial with Leaves

-
Image
Here's the Gelli Plate Tutorial you asked for! My Gelli plate has been well used and well loved. 1. Place Gelli Plate on a flat, covered working surface, and place small dots of paint onto the plate.  My demo photos are with me using acrylics and paper but it works exactly the same with fabric paint and fabric.  I like using Jacquard Textile paint when I make fabric prints. 2. Use a brayer to spread the paint evenly across the plate. 3.  I used the leaves as a resist for the first print. 4. Place the paper/fabric on top of the printing plate and smooth it out nicely to get an even print. 5.  Carefully lift up the paper/fabric. Found a photo from when I printed the fabric - see same process. This is a first print. 5.  I know that MONOprinting means ONE print but seriously, when you remove the leaves from the plate there are these beautifully textured leaves left on the plate just dying to be printed.  I couldn't ignore t...
Read more

Quilt National

-
Image
My husband and I took a red-eye flight to Columbus, Ohio, and then drove the one hour to Athens, Ohio, to attend the opening of the Quilt National quilt show where my piece, Wild Flowers was being shown. Made a stop at Tim Horton's, a Canadian chain for some delicious breakfast sandwiches and donut holes. We went to the Kennedy Art Museum, on the Ohio University campus. This is the side of the building. Photo of the front of the building from the cleveland.com website. The building was designed in the 1860s by Cleveland architect Levi Scofield, and was originally part of the Athen's Lunatic Asylum. It opened in 1996 as the Kennedy Museum of Art. There were some lovely prints, paintings and exhibits. It didn't take long to tour, which was good for my knees. I was glad to be able to see this Elizabeth Catlett print. I admire her work. I've seen some of her her other prints in person, and was anxious to also see this one. Friday evening, the Quilt National show opened, and...
Read more

Fabric Printing at Home Blog Tour

-
Image
About two months ago I wrote a review about the book Fabric Printing at Home written by my friend, Julie B. Booth . Today I'm going to show you one of the things I learned from her book and then give you an opportunity to win a copy of the book for yourself. I used a hot glue gun to create a design onto a toilet paper roll.  I was impatient and didn't seal the toilet paper roll with white glue or a gel medium before creating my design.   I inserted a short roller handle that one can find at the local hardware store into the toilet paper roll. . .   . . . and used my 3x5" Gelli Plate as a paint palette.  I rolled the paint across a sample piece of fabric. . . . . .first going long ways. . .  . . .and then again short ways. I really like the texture this provides whether I go once or twice across the fabric and I'm gladly adding it to my art "toolbox."  Have you tried something like this before?  What ha...
Read more