Testing

-
I went to the fabric store and purchased some scarf fabric.  I wanted to paint the scarves so I didn't pay attention to fiber content.  Well, like any good woman, I have now changed my mind and I don't remember what kind of fabric they are.  Normally at this point I would dump the fabric in a dye bath and soda ash and hope for the best.  But thanks to some recent knowledge, I know better.  I cut the selvedges off the two fabrics, added some dye and soda ash and ended with this:


Obviously one of the fabrics won't work with my MX fiber reactive dyes.
It's a good thing I didn't waste a lot of dye on it!
The other fabric is going to dye beautifully!
I'm looking forward to trying some new dye techniques on the fabric.

One of these methods I just learned in
Jane Dunnewold's "The Art of Cloth Dyeing" 
class on Craftsy.
   Online Quilting Class 
I bought the class and started watching it a few months ago and then got busy.  I finally made some time and finished it up today.  I've been dyeing fabrics for years but I still learned so much from Jane's class.  I love that I can ask Jane questions and have her answer them.  I can also see what others have asked and see their answers.  Craftsy classes are a great platform.  I really hope Jane will do more Craftsy classes.  I know there is so much more I need to learn from her.  I'll be posting my dyed scarves  later in the week when they are out of the dye bath.

Comments

Sylvia said…
I can't wait to see how the scarves turn out! I will have to think about signing up for that class, it sounds like a good one!
September 25, 2013 at 11:15 AM
Jeannie said…
Wow! That one fabric loves the dye! Thanks for the review on Craftsy. I've never taken a class from them, but wondered how they were.
September 29, 2013 at 1:18 AM
Post a Comment

Popular posts from this blog

Gelli Plate Tutorial with Leaves

-
Image
Here's the Gelli Plate Tutorial you asked for! My Gelli plate has been well used and well loved. 1. Place Gelli Plate on a flat, covered working surface, and place small dots of paint onto the plate.  My demo photos are with me using acrylics and paper but it works exactly the same with fabric paint and fabric.  I like using Jacquard Textile paint when I make fabric prints. 2. Use a brayer to spread the paint evenly across the plate. 3.  I used the leaves as a resist for the first print. 4. Place the paper/fabric on top of the printing plate and smooth it out nicely to get an even print. 5.  Carefully lift up the paper/fabric. Found a photo from when I printed the fabric - see same process. This is a first print. 5.  I know that MONOprinting means ONE print but seriously, when you remove the leaves from the plate there are these beautifully textured leaves left on the plate just dying to be printed.  I couldn't ignore t...
Read more

Fabric Printing at Home Blog Tour

-
Image
About two months ago I wrote a review about the book Fabric Printing at Home written by my friend, Julie B. Booth . Today I'm going to show you one of the things I learned from her book and then give you an opportunity to win a copy of the book for yourself. I used a hot glue gun to create a design onto a toilet paper roll.  I was impatient and didn't seal the toilet paper roll with white glue or a gel medium before creating my design.   I inserted a short roller handle that one can find at the local hardware store into the toilet paper roll. . .   . . . and used my 3x5" Gelli Plate as a paint palette.  I rolled the paint across a sample piece of fabric. . . . . .first going long ways. . .  . . .and then again short ways. I really like the texture this provides whether I go once or twice across the fabric and I'm gladly adding it to my art "toolbox."  Have you tried something like this before?  What ha...
Read more

Quilt National

-
Image
My husband and I took a red-eye flight to Columbus, Ohio, and then drove the one hour to Athens, Ohio, to attend the opening of the Quilt National quilt show where my piece, Wild Flowers was being shown. Made a stop at Tim Horton's, a Canadian chain for some delicious breakfast sandwiches and donut holes. We went to the Kennedy Art Museum, on the Ohio University campus. This is the side of the building. Photo of the front of the building from the cleveland.com website. The building was designed in the 1860s by Cleveland architect Levi Scofield, and was originally part of the Athen's Lunatic Asylum. It opened in 1996 as the Kennedy Museum of Art. There were some lovely prints, paintings and exhibits. It didn't take long to tour, which was good for my knees. I was glad to be able to see this Elizabeth Catlett print. I admire her work. I've seen some of her her other prints in person, and was anxious to also see this one. Friday evening, the Quilt National show opened, and...
Read more